Jon's Le Mans III

Jon's Le Mans III

Jon's Le Mans III

« 1 2 3 4 5 6 »

Rear fender extension reinstalled. The bottom left corner was cracked, so I plastic-welded it back together.

Rear fender extension reinstalled. The bottom left corner was cracked, so I plastic-welded it back together.

Left side cleaned, touched up and reassembled.

Left side cleaned, touched up and reassembled.

Battery cables are quite corroded.

Battery cables are quite corroded.

Making new ones. New ground cable is on the bottom.

Making new ones. New ground cable is on the bottom.

One carburetor cleaned - before and after

One carburetor cleaned - before and after

Both carburetors rebuilt

Both carburetors rebuilt

U-joint boot replaced, swingarm bearing greased, splines lubed - going back together.

U-joint boot replaced, swingarm bearing greased, splines lubed - going back together.

Installing new brake hoses and footpeg brackets.

Installing new brake hoses and footpeg brackets.

One new shock on.

One new shock on.

This isn't good - the friction material has separated from the metal backer on the right front brake pads.

This isn't good - the friction material has separated from the metal backer on the right front brake pads.

One caliper rebuilt

One caliper rebuilt

Before cleaning

Before cleaning

Pretty nasty inside...

Pretty nasty inside...

The rear caliper already has EBC pads installed.

The rear caliper already has EBC pads installed.

« previous | next »

Installing new brake hoses and footpeg brackets.

View Full-Size Image

Installing new brake hoses and footpeg brackets.